24/7 emergency locksmith across Dublin · 20–30 min response Call now: 087 437 7600

Our Latest Articles

Testing a mechanical key backup in a smart lock

Measure fit first: smart lock installation in Ireland, DIY or hire a pro

September 28, 2026

Hire a professional unless your door has a standard single-cylinder deadbolt with a typical backset and bore, and you’re genuinely comfortable with basic DIY. That measurement check, not the lock’s brand or app, decides whether a retrofit will work. Professional installation in Ireland typically runs from around €200 up to €400 or more depending on the lock and any carpentry involved, and Ecslocksmiths handles both simple retrofits and full replacements.


TL;DR:

  • Compatibility depends on measurement checks of backset, bore hole size, door thickness, and cylinder type, not the brand or app features.
  • Ensuring strike plate alignment and physically testing mechanical backup keys are crucial steps to prevent common smart lock failures.
  • Request itemized quotes covering parts, labor, carpentry, and VAT, and compare multiple bids to find the best value for complex installations.
  • For the simplest retrofits, use a standard single-cylinder deadbolt with typical measurements; otherwise, full replacement may be necessary.

Ecslocksmiths
Get Your Smart Lock Fit Right
Ecslocksmiths provides Dublin homeowners with lock installations, repairs, and advanced security upgrades for residential properties.
Visit Ecslocksmiths

Table of Contents

What happens during a professional smart lock installation

A good installer starts before they touch your door. Over the phone or from photos, they’ll ask about your cylinder type, door thickness and existing hardware to confirm the new lock will actually fit, rather than turning up and hoping.

On the day, the work generally follows the same pattern:

  1. Compatibility check: the fitter measures backset, bore diameter, cylinder type and door thickness against the lock’s specification.
  2. Test fit: the existing hardware is removed and the new unit offered up to confirm alignment before anything is fixed permanently.
  3. Retrofit or replace: where the door supports it, the smart module fits over the existing cylinder; where it doesn’t, the whole deadbolt is swapped out.
  4. Strike plate alignment: the plate is adjusted so the bolt throws cleanly, which is where most post-install jams come from if skipped.
  5. Pairing and checks: the lock is paired to its app or hub, firmware is updated, and battery levels are confirmed before the fitter leaves.

Timelines vary with the work involved. A straightforward retrofit takes around 10 to 15 minutes, while a professional installation or full replacement typically takes between half an hour and an hour per lock (https://smarthomegearhq.com/blog/smart-lock-installation-retrofit-guide), longer if the frame needs adjusting. Before the fitter leaves, they should hand over a working mechanical key, confirm your app access, show you what a low-battery alert looks like, and walk you through locking and unlocking at least once.

Pro Tip: Ask your installer to demonstrate the mechanical key backup before they leave, not just the app. It’s the one thing you’ll actually need in a panic.

Retrofit or full replacement: a five-minute fit check

Most of the guesswork in smart lock installation disappears once you take four measurements. Before booking anyone or buying a lock, check:

  • Backset: the distance from the door edge to the centre of the bore hole, usually 2-3/8 inches or 2-3/4 inches.
  • Bore hole diameter: most doors use a standard 2-1/8 inch bore, though older doors vary.
  • Door thickness: typically 1-3/8 to 1-3/4 inches; anything outside that range limits your options.
  • Cylinder type: single-cylinder deadbolts are the easiest fit for retrofit units; double-cylinder and mortise locks usually mean a full replacement instead.

Fit, not brand, is what makes or breaks a retrofit smart lock installation. Compatibility standards for retrofit units centre on backset, bore hole size, door thickness and cylinder type, and getting even one of these wrong is the most common reason a retrofit purchase gets returned.

Some retrofit units, such as the igloohome Retrofit and Bridge bundle, fit over an existing Euro profile cylinder without altering the outside of the door, but only within specific limits on cylinder protrusion, handle position and minimum backset. If you’re renting, check your lease before fitting anything: many landlords require permission for lock changes, and a retrofit that can be removed cleanly is usually the safer route.

If you’re requesting a remote quote, photograph the door edge with a tape measure against the bore hole, the cylinder from outside, and the door thickness from the top. That’s usually enough for an installer to confirm fit before they arrive.

Measuring a door for smart lock fit

How much does smart lock installation cost?

Price depends far more on what your door needs than on which lock you buy. In Ireland, standard lock installation typically costs between €70 and €300, while smart locks commonly sit in the €200 to €400-plus range once fitting is included.

Job type Typical price band
DIY retrofit (lock only, self-fitted) Cost of the unit itself
Professional retrofit installation €200-€400+
Full deadbolt replacement €200-€400+
Multipoint or high-security lock with carpentry Higher, depending on frame work

Several things push a quote toward the top of that range: a non-standard bore or backset that needs frame and door work, multipoint locking systems, out-of-hours call-outs, and any ongoing monitoring subscription tied to the lock. For related security installations, installer labour commonly adds €200 to €500 to the cost of parts, and VAT at 23% is typically applied, so always confirm whether a quote is inclusive before comparing prices.

When requesting a quote, ask for it itemised: parts, labour, any carpentry, and VAT listed separately. That’s the only way to compare two installers fairly, since a “one price” quote can hide very different scopes of work.

How much does smart lock installation cost? — overview diagram

Choosing an installer: questions, red flags and warranties

A few questions before booking save most of the headaches later:

  • Have they checked compatibility against your specific door measurements, or are they quoting blind?
  • Do they have direct experience fitting smart locks specifically, not just traditional cylinders?
  • What warranty covers the lock and the installation labour separately?
  • Are they insured, and does that cover accidental damage to the door or frame?
  • Is firmware and update support included, or does that fall to you afterwards?

Watch for red flags: a vague scope of work, a single flat price with no breakdown, pressure to decide on the spot, or an installer who insists the lock must run entirely through the cloud with no local fallback. A trustworthy installer will give you an itemised invoice, clear guidance on battery type and expected life, and a walkthrough of pairing the lock to your phone before they leave.

Pro Tip: Get at least two quotes for anything beyond a simple retrofit. Comparing itemised breakdowns, not just the bottom line, is what actually reveals the better deal.

Field notes: what actually causes smart lock failures

Most call-backs on smart locks trace to a handful of avoidable mistakes rather than the lock itself.

Final seating with a hand screwdriver, not an electric driver, preserves alignment and stops screw heads from stripping. Torque to the manufacturer’s guidance rather than driving the screws in hard and fast.

Firmware should be updated and the lock paired before the door is closed for the final time, and the mechanical key backup and motor direction both deserve a physical test on site, not just a glance at the app. Locks that support a local protocol such as Z-Wave, Matter or Thread tend to keep working through a broadband outage, which matters more than most buyers expect. Battery type and expected life should be confirmed at handover so you’re not caught out by a flat cell six months in.

A locksmith’s view on reliable installations

Most failed installs often come down to strike plates that were never properly aligned or screws driven in too hard during a rushed job, not faulty locks. Reliable installers check fit before quoting, test the mechanical backup before leaving, and may back installs with a written warranty. Some provide a free estimate up front and offer 24/7 availability for follow-up attention.

— Barry

Ecslocksmiths: what we do and how to get a quote

If measuring backsets and cylinder types isn’t how you want to spend your Saturday, a direct installer can fill that gap by handling compatibility checks, supplying suitable locks, professional fitting, pairing and walkthroughs.

Ecslocksmiths

A typical quote covers:

  • A fit check against your door’s measurements before any price is confirmed.
  • Supply and professional fitting of the lock, including strike plate alignment.
  • App pairing, firmware checks and a demonstration before we leave.
  • A written warranty on both the lock and the installation work.

Estimates are free, and we’re available around the clock for anything from a straightforward retrofit to a full replacement. Get in touch through Ecslocksmiths for a quote, or read more on our smart lock installation guide if you want the detail before you book.

Sources

FAQ

Can I install a smart lock myself?

Yes, if your door has a standard single-cylinder deadbolt with a typical backset and bore hole, many retrofit locks fit without modifying the door. Retrofit fitting usually takes 10 to 15 minutes, but any mismatch in measurements or unusual hardware makes professional fitting the safer route.

Do I need a locksmith to install a smart lock?

You don’t strictly need one for a straightforward retrofit on a compatible door, but a locksmith is worth it for full replacements, multipoint locks, or any door that needs frame work. A professional also gives you a written warranty on the fitting itself, not just the lock.

Can I install a smart lock on any door?

No, fit depends on backset, bore hole size, door thickness and cylinder type, and some doors, particularly those with mortise or double-cylinder locks, usually need a full replacement rather than a retrofit. Measuring these four points first, as covered in the fit checklist above, tells you which route applies before you buy anything.

How do I set up my smart lock?

Setup involves pairing the lock to its app or hub, updating its firmware, and testing the mechanical key backup before you rely on it. A professional installer will typically walk you through this at handover, including how battery alerts work, so you’re not troubleshooting it alone later.

smart lock installationretrofit smart lockinstall smart locksmart lock setupdigital door lock not workingsmart lock troubleshootingelectronic lock troubleshootingbenefits of smart lockssmart lock installation guidehow to install smart lockDIY smart lock installationbest smart lock for installationcost of smart lock installationsmart home security locks
Back to Blog

What services do locksmiths in Ireland actually offer?

It’s more than just unlocking doors. Most locksmiths provide:

Emergency lockouts (home, car, business)

Lock repairs and replacements

Key cutting and rekeying

Security upgrades (e.g. anti-snap locks)

Car key replacement

How quickly can you respond to an emergency?

In emergency situations, typical arrival times should be at your location within 20-30 minutes. There are always professional locksmiths on standby, ready to handle any lockout or security emergency, ensuring safety is never compromised.

Can a lockmsith help with high-security locks and systems?

Absolutely! Most locksmiths specialise in advanced high-security lock systems, including electronic locks, biometric security, smart locks, and keyless entry systems. The should be trained in the latest security technologies, ensuring that they can provide the highest level of protection for your home, office, or vehicle. Ask for a free expert consultation to help you choose the right security system for your needs.

Will a locksmith provide a warranty on there services?

Yes, all locksmiths should stand by the quality of there work and offer a 100% satisfaction guarantee. Most would by default offer a warranty on all services, ensuring that you receive the best craftsmanship and long-lasting results.

Can a locksmith open Cars

Yes, most locksmiths are trained to open cars.

How quickly can a locksmith get to me in an emergency?

Most locksmiths in Ireland offer 24/7 emergency callouts and typically arrive within 15–60 minutes, depending on your location and traffic. In Dublin, response times can be as fast as 10–30 minutes, especially for emergency lockouts.

Can a locksmith open my door without damaging it?

Yes A professional locksmiths use non-destructive entry methods first. Drilling is usually a last resort, not the default approach.

If someone immediately suggests drilling without inspecting the lock, that’s a red flag.

How much does a locksmith cost?

Costs vary depending on the service, time of day, and complexity of the job. A standard lockout is usually cheaper than replacing a lock. Emergency or late-night services may cost more.

Prices vary, but here’s a realistic guide:

Standard callout/labour: €85–€95

Lockout service: from ~€85–€120+

Lock replacement: depends on parts + labour

Important: Always ask for a full quote upfront and if there is a call out fee. Some companies advertise low prices but increase costs after arriving.

Prices can vary quite a bit… call around for quotes!

Can you make a key without the original?

Yes A professional locksmiths use non-destructive methods whenever possible. Damage usually only happens if the lock is faulty, high-security, or has already been tampered with.

Do locksmiths in Ireland need to be licensed?

Yes. In Ireland, all locksmiths must be licensed by the Private Security Authority (PSA).

If you’re hiring someone:

Ask for their PSA licence number

Avoid anyone who can’t prove credentials

By asking for the licence you avoid the scammers.

Providing Locksmith Services For More Than 30 Years in Dublin, lock outs, lock fitting, slam locks, car opening, commerical and domestic.

Quick Links

Home

About Us

Services

Testimonial

Faqs

Contact Us

All Dublin Areas

Malahide

00353874377600

Legal

Privacy Policy

Terms & Conditions