
A single cylinder lock has a keyhole on the outside and a thumb-turn (or knob) on the inside. A double cylinder lock needs a key on both sides. For most Irish homes, a single cylinder with a thumb-turn on the final exit door is the sensible choice, because you can leave quickly in a fire without hunting for a key. A double cylinder suits some doors well, but only where the exit route is planned around it.
The terms get muddled because people use them for two different products: the American-style deadbolt and the Euro profile cylinder that sits in most Irish uPVC, composite and timber doors. This guide covers both, the Irish rules that affect your choice, and how to pick for a home, a rental or a pub or restaurant.
The word “cylinder” refers to the part that your key turns. What matters is what is on each face of the door.
Single cylinder (also called thumb-turn cylinder). There is a keyhole on the outside. On the inside there is a thumb-turn, a small knob or lever you twist by hand. You lock and unlock from inside without a key.
Double cylinder (also called key-and-key). There is a keyhole on both sides. You need the key to lock or unlock from either side, which is why people call it a key-both-sides lock. One manufacturer guide describes the same split for deadbolts: a keyhole outside and thumb-turn inside for single, keys on both sides for double.
A third version you will see in Ireland is the key-and-turn or thumb-turn with emergency release, which is a single cylinder that also lets you open from outside with a key even if the thumb-turn is turned. It is a common arrangement on Euro cylinders and is what most people mean when they ask for a “normal” cylinder.

A deadbolt is a standalone bolt that throws into the frame and is operated by its own cylinder. You see them more often on older doors and on timber doors where an extra lock was added. A Euro cylinder is the removable barrel that slots into a mortice lock case, the setup found in most multipoint uPVC and composite doors and many timber doors.
Both come in single and double versions, and the same questions apply: who needs to open the door from the inside, and how fast?
Security and escape pull in opposite directions, and that is the whole debate.
With a single cylinder, anyone inside can open the door in a second. That is ideal in an emergency. The trade-off people raise is that if a thief can break glass or reach through a letterbox or side panel near the thumb-turn, they might turn it. This is a position problem rather than a lock problem, and there are neat fixes: a different door layout, laminated glazing, a letterbox cage, or a lock with a lockable thumb-turn.
With a double cylinder, a person who reaches in cannot turn anything without the key. That is the appeal on doors with glass within arm’s reach. The flip side is that you need the key to leave. Unless it is always in the same, known place, that can slow an exit in a fire or a panic.
That is why one supplier’s comparison says single cylinders are generally preferred on residential front doors, since they allow you out without a key when it counts.
This is where Irish readers should pay attention, because the answer is not just a matter of taste.
The government’s fire safety in the home booklet tells households to keep exits clear and, if front and back doors need keys, to keep those keys readily accessible, known to everyone in the home and close to the doors. If you use a double cylinder, that advice is the rule you live by: a hook or a fixed spot beside the door, never in a pocket or a drawer elsewhere.

The Private Security Authority’s information note for locksmiths (November 2018) sets out two points worth knowing:
In plain terms: if your final exit door has a thumb-turn today, swapping it for a key-both-sides cylinder is the wrong direction. If you are unsure which door counts as the final exit, ask the locksmith before work starts.
Business owners have a stricter standard. Under the Safety, Health and Welfare at Work (General Application) Regulations 2007, emergency doors and gates must not be locked or fastened in a way that stops anyone who needs them in an emergency from opening them easily and immediately. The same regulations say mechanical doors and gates that act as emergency exits must be manually openable unless they open automatically on a power failure.
For a pub, restaurant or shop, that means a key-both-sides cylinder on a door that customers or staff would use to escape is not the right fit. Doors on the escape route need a thumb-turn, a panic bar or another quick-release device. Back-of-house doors that are not part of an escape route are a different matter, and you can use a double cylinder where that suits the layout.
Start with the door, not the lock. Ask three questions: is this a final exit door, can someone reach the inside handle or thumb-turn through glass or a letterbox, and who needs to leave through it quickly?
| Situation | Usually best | Why |
|---|---|---|
| Front door of a family home | Single cylinder with thumb-turn | Fast exit for everyone, including children and visitors |
| Back door with no glass nearby | Single cylinder with thumb-turn | Same speed of exit, no key hunting |
| Door with glazing or a side panel within arm’s reach | Single with a lockable or hidden thumb-turn, or a double cylinder with a fixed key spot | Stops a reach-through, but keep the key at the door |
| Rental property or HMO | Single cylinder, thumb-turn | Tenants and guests can leave without a key; a lockout is also less likely |
| Pub or restaurant escape route | Thumb-turn, panic bar or emergency exit device | Must open easily and immediately |
| Storage room, office or back-of-house door off the escape route | Either, depending on the layout | Choose by who needs access |
| Garden shed or gate | Double cylinder or padlock-style solution | No emergency exit concern |
If you are a landlord or property manager, standardising on single cylinders with a thumb-turn and keeping a record of key holders is simple and tidy. Our guide to hinge bolts for doors covers another upgrade that strengthens the hinge side of the door.
Whether the cylinder is single or double matters less than the quality of the cylinder itself and the door and frame around it. A well-made cylinder with a robust door furniture set and a properly fitted frame will do more for you than switching from single to double. If you are worried about break-ins, tell the locksmith what concerns you, such as a glazed door, a shared hallway or a history of attempts, and they can suggest the right combination of cylinder, handle and door reinforcement.
The other question people type is about Euro and oval, and it is a separate matter from single vs double.
One supplier’s FAQ notes that handles need the matching cutout, so the cylinder and the lock case must correspond. Oval profiles are less common in modern hardware than Euro, so if you have an older door with an oval cylinder, a locksmith can tell you whether to replace like for like or change the lock case to a Euro profile.
You can have single and double versions in either profile. So the choices stack: profile (Euro or oval) first, then function (thumb-turn or key-both-sides), then size.
Cylinder sizes are often asymmetric, with a different length on the outside and the inside. An Irish hardware supplier’s Euro cylinder guide explains the method: remove the old cylinder, then measure from the centre of the fixing screw hole to each end, outside and inside, separately.
To make that practical:
Getting it wrong has a cost: too long and the cylinder protrudes, too short and the key or thumb-turn cannot engage properly. If you would rather skip the measuring, this is exactly the kind of job a locksmith does in minutes.
If keys are lost or stolen, you generally replace the cylinder, and the lock case stays in the door. That is the usual approach for Euro and oval systems, and it is quicker and cheaper than replacing the whole lock. It also gives you the chance to change from a double to a single, or the other way, if the door’s layout has changed, provided the change stays within the Irish guidance above.
We get calls about this every week, and the honest answer is that the door decides. Most of the time a single cylinder with a thumb-turn is what a home needs: it is quick to use, it keeps everyone safe in an emergency, and it fits the Irish guidance on final exit doors.
Where a double cylinder makes sense, we fit it with a clear plan for the key. For pubs and restaurants we look at the whole escape route first, then choose the lock, a thumb-turn, panic bar or emergency exit device, so the door opens easily and immediately when it has to.
Our approach is to measure the existing cylinder, check the lock case and the door furniture, and talk through who uses the door and how. That is also why we offer free estimates: you should know what the job involves before you decide. If you need a lock changed, rekeyed, upgraded to a high-security cylinder or fitted with a smart lock, we do it as part of the same visit.
Barry
We fit, replace and rekey cylinders for homes, businesses and vehicles across Dublin, and we also install high-security locks, smart locks, panic bars and emergency exit devices. We offer 24/7 availability and free estimates. Emergency lockout assistance is priced at €85 to €120 as a one-off. See everything we do on our locksmith services page, or find your area through our Dublin locksmith page.

Tell us the door type, whether it is your final exit, and what is on each side now. We will recommend single or double cylinder, the right profile and the right size, and fit it. More practical guides are on our locksmith blog.
Not automatically. A double cylinder stops someone reaching in and turning a thumb-turn, but you need a key to leave, which matters in a fire. For most final exit doors in Irish homes, a single cylinder with a thumb-turn is the safer everyday choice, with security added through better door furniture and glazing.
Identify the profile first (Euro or oval), then the function (thumb-turn or key-both-sides), then the size. To size a Euro cylinder, remove it and measure from the fixing screw hole to each end, outside and inside. A locksmith can do all three checks on site.
For many doors, yes, provided the door, frame and strike plate are solid and the lock is good quality. If your door has glazing near the inside turn, or you want extra resistance, ask about a high-security cylinder, an additional lock or hinge-side reinforcement.
On a new dwelling or extension, the final exit door must have a thumb-turn or other readily openable mechanism, according to the PSA’s note for locksmiths. On an existing final exit door that already has a thumb-turn, it must be replaced with at least a thumb-turn. Ask your locksmith to confirm which applies to your door.
Doors that people may need in an emergency must open easily and immediately under the 2007 workplace regulations. A thumb-turn, panic bar or emergency exit device is the usual approach, rather than a key-both-sides cylinder.
It’s more than just unlocking doors. Most locksmiths provide:
Emergency lockouts (home, car, business)
Lock repairs and replacements
Key cutting and rekeying
Security upgrades (e.g. anti-snap locks)
Car key replacement
In emergency situations, typical arrival times should be at your location within 20-30 minutes. There are always professional locksmiths on standby, ready to handle any lockout or security emergency, ensuring safety is never compromised.
Absolutely! Most locksmiths specialise in advanced high-security lock systems, including electronic locks, biometric security, smart locks, and keyless entry systems. The should be trained in the latest security technologies, ensuring that they can provide the highest level of protection for your home, office, or vehicle. Ask for a free expert consultation to help you choose the right security system for your needs.
Yes, all locksmiths should stand by the quality of there work and offer a 100% satisfaction guarantee. Most would by default offer a warranty on all services, ensuring that you receive the best craftsmanship and long-lasting results.
Yes, most locksmiths are trained to open cars.
Most locksmiths in Ireland offer 24/7 emergency callouts and typically arrive within 15–60 minutes, depending on your location and traffic. In Dublin, response times can be as fast as 10–30 minutes, especially for emergency lockouts.
Yes A professional locksmiths use non-destructive entry methods first. Drilling is usually a last resort, not the default approach.
If someone immediately suggests drilling without inspecting the lock, that’s a red flag.
Costs vary depending on the service, time of day, and complexity of the job. A standard lockout is usually cheaper than replacing a lock. Emergency or late-night services may cost more.
Prices vary, but here’s a realistic guide:
Standard callout/labour: €85–€95
Lockout service: from ~€85–€120+
Lock replacement: depends on parts + labour
Important: Always ask for a full quote upfront and if there is a call out fee. Some companies advertise low prices but increase costs after arriving.
Prices can vary quite a bit… call around for quotes!
Yes A professional locksmiths use non-destructive methods whenever possible. Damage usually only happens if the lock is faulty, high-security, or has already been tampered with.
Yes. In Ireland, all locksmiths must be licensed by the Private Security Authority (PSA).
If you’re hiring someone:
Ask for their PSA licence number
Avoid anyone who can’t prove credentials
By asking for the licence you avoid the scammers.

Providing Locksmith Services For More Than 30 Years in Dublin, lock outs, lock fitting, slam locks, car opening, commerical and domestic.
Home
About Us
Services
Testimonial
Faqs
Privacy Policy
Terms & Conditions