Our Latest Articles

Locksmith replacing a multipoint door gearbox

Double Glazed Door Lock Repair in Ireland: Why Gearboxes Get Replaced

October 15, 2026

If your double glazed door lock works fine when the door stands open but jams the moment you close it, the fault is almost always alignment, not a broken mechanism, and a few small adjustments will usually sort it. Try the open versus closed test first, then use a smart WiFi garage door controller or a silicone based lubricant on the latch and keyway. If the handle feels loose, grinds, or the door simply will not secure, stop and call a locksmith rather than forcing anything.


TL;DR:

  • Avoid oil based sprays such as WD40 because they attract grit and can gum up the mechanism; test the lock after each adjustment.
  • Move the strike plate gradually rather than filing or cutting it, and photograph the hinges, keeps, and handle before changing their positions.
  • Call a locksmith if stiffness persists, the handle feels loose, grinding occurs, the key breaks, or the door cannot lock reliably.
  • For internal failures, locksmiths usually replace the sealed gearbox or multipoint strip; request an itemized quote and confirm the parts warranty before booking.
  • For faults within six months of delivery, Irish law presumes the fault existed from the start, so contact the seller before paying for repairs.

Ecslocksmiths
Get Help With a Sticking Door Lock
Ecslocksmiths provides lock repairs and installations for homes in Dublin, including help when a double glazed door lock will not secure.
Contact Ecslocksmiths

Table of Contents

Quick checklist to diagnose a jammed uPVC or composite door lock

Before you touch a screwdriver, work through a short diagnostic pass. Most jammed double glazed door locks fall into one of two camps: the door has shifted slightly out of alignment, or something inside the lock mechanism has failed. Telling the two apart saves you from making an easy fix harder.

  • Test the lock with the door open, then again with it closed, since a clean operation when open but resistance when closed points to alignment rather than a mechanism fault.
  • Listen for grinding or clicking and note how the handle feels when lifted, since harsh sounds usually mean internal wear.
  • Apply a silicone based lubricant to the latch, keeps and keyway, and avoid oil based sprays such as WD40, which attract grit and gum up the mechanism.
  • Check hinges, screws and the strike plate for looseness or sag, since a dropped door is a common cause of a sticking multipoint lock.
  • Never force the handle or slam the door repeatedly, as this tends to turn a simple alignment issue into a broken gearbox.

Step by step troubleshooting you can try safely at home

A controlled approach works better than a scattergun one. Change one thing, test it, and only move to the next step if the problem persists.

What you need: a silicone based lubricant spray, a set of screwdrivers (flathead and Phillips), a soft cloth, and a phone camera to record what you find.

  1. Test with the door open. Lift the handle and turn the key with the door standing open. If the mechanism moves smoothly, the fault lies in how the door meets the frame when closed, not in the lock itself.
  2. Lubricate the moving parts. Spray silicone lubricant into the keyway, along the latch and into each keep, then operate the lock five or six times to work it through the mechanism.
  3. Tighten and adjust. Check every external screw on the hinges and keeps, tightening any that have worked loose. If the door has dropped slightly, a small hinge adjustment can bring it back into line.
  4. Adjust the strike plate gradually. Move the keeps or strike plate gradually rather than filing or cutting anything, since you want to confirm the misalignment before making a permanent change.

After each step, close the door and test the lock again before moving on. Photograph the hinges, keeps and handle before you start, so you have a clear record of the original setup if you need to show a locksmith or the original seller what you tried.

Pro Tip: Keep a note of which step fixed the problem, since it tells you exactly where the door is likely to drift again in future.

When to stop DIY and call a professional locksmith

Some signs mean the problem has moved beyond lubrication and small adjustments, and further attempts risk damaging the lock permanently.

  • The lock stays stiff or binds after lubrication and a careful alignment check.
  • The handle feels loose, you hear grinding, or you can see visible damage inside the mechanism.
  • A key has snapped off in the lock, or the door will not lock and unlock reliably every time.
  • The frame itself is warped or sagging badly, or you do not have the tools to go further.
  • You are locked out entirely or cannot secure the property, which calls for an emergency response rather than more troubleshooting.

What a locksmith will do: diagnosis and common professional repairs

A technician starts by repeating the same open versus closed test you ran at home, but with tools to measure exactly how far the door has shifted and whether the gearbox itself is turning freely. That confirms whether you are dealing with simple misalignment or an internal mechanism failure.

Minor issues get resolved on site: a hinge gets realigned, the strike plate gets repositioned, or worn screws get replaced with longer ones that bite into solid timber or the frame reinforcement. These are quick, low disruption fixes.

Three common minor door lock repairs

Where the fault sits inside the lock itself, the usual approach is to replace the multipoint lock strip or the sealed gearbox rather than open it up and repair the internals. Multipoint gearboxes are factory sealed and built as a single unit, so manufacturers and the wider trade treat replacement as the reliable route rather than an internal rebuild that cannot be guaranteed to last. A locksmith will source the correct strip for your door’s backset and function, fit it, and test the door through several full open and close cycles before calling the job finished.

Typical costs and repair timelines to expect

A straightforward call-out for lubrication, a hinge tweak or a strike plate adjustment is usually quick and sits at the lower end of locksmith pricing. A full multipoint strip or gearbox replacement takes longer, since it involves removing the old unit, matching a replacement to your door’s dimensions and fitting it correctly, and the parts themselves add to the bill.

How long a repair takes depends largely on whether the part is in stock or needs ordering. Ask for an itemised estimate that separates parts, labour and expected turnaround before any work begins, so there are no surprises later.

If the lock or door is recently purchased and has failed early, contact the seller before paying for a separate repair, since you may be entitled to a free fix or replacement within six months of delivery.

Consumer rights and seller obligations for faulty locks

Under the Consumer Rights Act 2022, a seller must offer a free repair or replacement when goods turn out to be faulty. If the fault shows up within six months of delivery, it is presumed to have existed from the start, which puts the burden on the seller rather than you to prove otherwise.

Where a repair or replacement cannot reasonably be achieved, you may be entitled to a price reduction or a full refund instead. Traders are expected to carry out repairs within a reasonable time and without significant inconvenience to you.

Contact the seller first and keep your proof of purchase, since this is the starting point for any claim. If a dispute drags on with an Irish-based trader, official guidance and dispute resolution routes are available to help you push the claim further.

Consumer rights and seller obligations for faulty locks — overview diagram

Practical tips from the trade: what gets missed and what to avoid

Change one thing at a time and test straight after. A scattergun approach, where several screws get loosened and the strike plate gets moved before you have tested anything, tends to cause secondary damage that makes the original fault harder to pin down.

Photograph the door and lock before any work starts, since this record matters if you end up discussing a warranty claim or a seller dispute. A quick dose of silicone lubricant twice a year, timed around the change in seasons, heads off the seasonal misalignment that uPVC and composite doors are prone to as temperatures shift.

— Barry

ECS Locksmiths: how we handle jammed double glazed door locks

When troubleshooting has not fixed the problem, we handle everything from a stuck handle to a full multipoint strip replacement, and we offer emergency lockout assistance. Our door repair service covers diagnosis, hinge and strike plate adjustment, and full lock installation where a gearbox has failed beyond repair.

  • Ask for an itemised quote covering parts, labour and expected turnaround before booking.
  • Check what parts warranty applies to a replacement multipoint strip or gearbox.
  • Request a local call-out time when you book, since availability varies by area.

Ecslocksmiths

If your door will not lock properly or you are facing a lockout, get an estimate from our services page and we will talk you through the fastest way to get it sorted.

FAQ

How much does it cost to fix a double glazed door lock?

Costs depend on whether the fix is a minor adjustment or a full multipoint strip or gearbox replacement, with simple call-outs sitting lower and parts-based repairs costing more. For an emergency lockout specifically, current prices are on our services page.

Why is my uPVC door lock mechanism stuck, and how do I fix it?

A stuck uPVC lock is most often caused by the door dropping slightly out of alignment with its keeps, which you can confirm by testing the lock with the door open versus closed. Try silicone lubricant on the latch and keyway first, and if stiffness persists after lubrication and a hinge check, the gearbox itself may need replacing.

How do I change a double door lock?

Changing a double door lock usually means removing the handles and cylinder, withdrawing the old multipoint strip from the edge of the door, and fitting a replacement matched to the door’s backset and function before reassembling the handles and testing the operation. Because sealed gearboxes are not designed for internal repair, this is a job most people leave to a locksmith to get the fit and testing right.

Where can I get replacement locks for my uPVC door?

Replacement multipoint strips and gearboxes are sourced by locksmiths and specialist suppliers who match the part to your door’s exact dimensions and function. If the lock is recently purchased and has failed, contact the seller first, since under consumer rights law you may be entitled to a free repair or replacement within six months of delivery.

Sources

For the full wording behind the points above, see the sources listed below.

double glazed door lock repairupvc double door lockdoor lock troubleshootingglazed door lock issuesrepair double glazing locksdoor lock maintenancereplace door lock mechanismdouble glazed window lock repairhow to fix door lockslocked double glazed doorupvc door lock repairdouble glazing hardware repair
Back to Blog

What services do locksmiths in Ireland actually offer?

It’s more than just unlocking doors. Most locksmiths provide:

Emergency lockouts (home, car, business)

Lock repairs and replacements

Key cutting and rekeying

Security upgrades (e.g. anti-snap locks)

Car key replacement

How quickly can you respond to an emergency?

In emergency situations, typical arrival times should be at your location within 20-30 minutes. There are always professional locksmiths on standby, ready to handle any lockout or security emergency, ensuring safety is never compromised.

Can a lockmsith help with high-security locks and systems?

Absolutely! Most locksmiths specialise in advanced high-security lock systems, including electronic locks, biometric security, smart locks, and keyless entry systems. The should be trained in the latest security technologies, ensuring that they can provide the highest level of protection for your home, office, or vehicle. Ask for a free expert consultation to help you choose the right security system for your needs.

Will a locksmith provide a warranty on there services?

Yes, all locksmiths should stand by the quality of there work and offer a 100% satisfaction guarantee. Most would by default offer a warranty on all services, ensuring that you receive the best craftsmanship and long-lasting results.

Can a locksmith open Cars

Yes, most locksmiths are trained to open cars.

How quickly can a locksmith get to me in an emergency?

Most locksmiths in Ireland offer 24/7 emergency callouts and typically arrive within 15–60 minutes, depending on your location and traffic. In Dublin, response times can be as fast as 10–30 minutes, especially for emergency lockouts.

Can a locksmith open my door without damaging it?

Yes A professional locksmiths use non-destructive entry methods first. Drilling is usually a last resort, not the default approach.

If someone immediately suggests drilling without inspecting the lock, that’s a red flag.

How much does a locksmith cost?

Costs vary depending on the service, time of day, and complexity of the job. A standard lockout is usually cheaper than replacing a lock. Emergency or late-night services may cost more.

Prices vary, but here’s a realistic guide:

Standard callout/labour: €85–€95

Lockout service: from ~€85–€120+

Lock replacement: depends on parts + labour

Important: Always ask for a full quote upfront and if there is a call out fee. Some companies advertise low prices but increase costs after arriving.

Prices can vary quite a bit… call around for quotes!

Can you make a key without the original?

Yes A professional locksmiths use non-destructive methods whenever possible. Damage usually only happens if the lock is faulty, high-security, or has already been tampered with.

Do locksmiths in Ireland need to be licensed?

Yes. In Ireland, all locksmiths must be licensed by the Private Security Authority (PSA).

If you’re hiring someone:

Ask for their PSA licence number

Avoid anyone who can’t prove credentials

By asking for the licence you avoid the scammers.

Providing Locksmith Services For More Than 30 Years in Dublin, lock outs, lock fitting, slam locks, car opening, commerical and domestic.

Quick Links

Home

About Us

Services

Testimonial

Faqs

Contact Us

All Dublin Areas

Malahide

00353874377600

Legal

Privacy Policy

Terms & Conditions